Hooks are readily available up to 25 tonnes and higher capacities can also be supplied to suit almost any load. Hooks can have plain shanks or an eye and can be fitted with a swivel assembly. lightweight hooks such as carbine or snap hook can also be supplied for a range of loads.


Dee and Bow shackle are often the vital link used for lifting, pulling and securing attachments throughout every type of industry. Both high tensile steel and high load alloy shackles are normally supplied with screwed eye pins. Alternatively hexagon heads with nuts, square heads or countersunk are also available.


Collar or dynamo eye bolts are available for many different uses. Dynamo eyebolts make provision for vertical lifts only if used in pairs, a spreader frame is required. A range of capacities are available up to 10 tonnes. Collar eye bolts are suitable for angled lifts (ie. two-leg stings) recommended not to exceed 45 degrees from vertical. Capacities are up to 25 tonnes. Eye nuts and bow nuts are also available in a number of sizes and capacities details on request.

Wire Rope Grips

Also referred to as bulldog grips. Used with thimbles, they provide an efficient means of producing an open eye termination. Standard sizes accommodate wire diameters between 6mm and 56mm. larger sizes are also available. Commercial grips. non-tested, are often used for lashing and fencing applications.

Riggins and Straining Screws

Also known as turnbuckles, available with eye, hook, yoke or thimble termination, or a combination to suit a particular application. Used for tensioning and straining guys, lashings, rigging, fencing, etc.

Your requirements

If you would like further information about our services and the products we supply and install, why not contact our office and we can then discuss your requirements.